The kids were home from college and one wanted to plant some herbs for his summer cooking, the other wanted to make a succulent garden. Since we are under drought conditions and have to cut our water by 30 percent, something that wouldn’t require a lot of watering was necessary. This cinder block block planter worked for both!
Step 1: Materials
Cinder blocks (we used 9 but you can make your planter as big as you want)
Plants – we used herbs and succulents
Galvanized wire mesh
Two 1/4″x1″x18″ galvanized steel strips (optional- see Step 4)
Step 2: Work out your design
Try stacking the block in different ways to see which will work the best for your space to create interest.
Step 3: Wire mesh and landscape fabric
To hold the soil up in a single block cavity rather than fill each cavity deep, wire mesh and landscape fabric were cut and put under the blocks to hold the soil and let water drain. Put the mesh first and then cover with the fabric.
Step 4: Cantilevered block
To create some interest one block was cantilevered (sticking out and only fixed in place at one end). Two strip of metal were cut to length and put under the block to hold the wire mesh and fabric in place.
Step 5: Add plants
Now it is time to fill the blocks with soil and plant the plants. Some cinder blocks at the brickyard had larger holes then others, so you may want to do some research before buying your blocks.
Did you have a go at this project? Let us know how you went in the comments below!
1 Million Women is more than our name, it’s our goal! We’re building a movement of strong, inspirational women acting on climate change by leading low-carbon lives. To make sure that our message has an impact, we need more women adding their voice. We need to be louder. Joining us online means your voice and actions can be counted. We need you. We’re building a movement of women fighting climate change through the way we live.